Supplier log in
Main Building/Fencing Contractor for LSM Fencing & Gates at Eketahuna School
Details
| RFx ID : | 33992232 |
| Tender Name : | Main Building/Fencing Contractor for LSM Fencing & Gates at Eketahuna School |
| Reference # : | Eketahuna School |
| Open Date : | Thursday, 30 April 2026 9:00 AM (Pacific/Auckland UTC+12:00) |
| Close Date : | Wednesday, 27 May 2026 5:00 PM (Pacific/Auckland UTC+12:00) |
| Department/Business Unit : | Board of Trustees - Approve by BoT - ie. School Principal |
| Tender Type : | Request for Tenders (RFT) |
| Tender Coverage : | Sole Agency [?] |
| Categories : |
|
| Regions: |
|
| Exemption Reason : | None |
| Required Pre-qualifications : | None |
| Contact : |
All enquiries to be made through the GETS Questions & Answer function. |
| Alternate Physical Delivery Address : | All submissions to be made through the GETS website. |
| Alternate Physical Fax Number : |
The Contract Works required are: Install new 1.8m high aluminium fencing with mowing strip. No foot holes, steps or horizontal bars that facilitate climbing (distance between structural horizontal beams to be at least 1200mm apart) or structures within 1m of the fence that facilitate climbing. Fence work reaches down to the ground leaving no gaps (maximum 100mm) Minimum height 1800mm with no exposed points at the top. Gates with safety latches situated approximately 1600mm from the ground level or high. Gates to be fitted with auto-closing mechanisms. New concrete vehicle crossing & footpath to be installed. Note:- works are to be priced by issue - refer to quotation form attached. All works can be combined on the tender summary sheet.
Suppliers are required to describe how their proposed approach will deliver economic benefits to New Zealand, including (but not limited to): Use of local labour for the delivery of the bathroom modification works. Engagement of New Zealand–based subcontractors and trades, including small and medium enterprises where appropriate. Supporting regional employment by sourcing workers from the local area where possible. Use of locally supplied materials where suitable and feasible. Suppliers should provide clear, practical examples of how they will demonstrate these benefits during contract delivery.
All work to comply with manufacturer’s specifications and recommendations.
All tender documentation and necessary information attached.
Contractors MUST visit site for tender to be compliant. Contact the noted representative in Invite Letter to arrange a site visit.
Ideally dependent on MoE funding approval this work would start as soon as possible after confirmation provided, however this will be discussed with the successful contractor and school once funding approvals are confirmed.
TERMS AND CONDITIONS: https://education.govt.nz/assets/Documents/Primary-Secondary/Property/Procurement-templates-guides/School-Property-Procurement-RFx-Process-Terms-Conditions-Conditions-of-Tendering-2017-2.pdf
