Supplier log in
Registration of Interest for Provision of Offsite Manufactured School Buildings
Details
|
Tender Closed
|
|
| RFx ID : | 26078734 |
| Tender Name : | Registration of Interest for Provision of Offsite Manufactured School Buildings |
| Reference # : | MOE18025 |
| Open Date : | Friday, 22 July 2022 12:30 PM (Pacific/Auckland UTC+12:00) |
| Close Date : | Wednesday, 10 August 2022 12:00 PM (Pacific/Auckland UTC+12:00) |
| Department/Business Unit : | Ministry of Education - Approval from Ministry Employee - ie. Case Manager |
| Tender Type : | Registration of Interest (ROI) |
| Tender Coverage : | Sole Agency [?] |
| Categories : |
|
| Regions: |
|
| Required Pre-qualifications : | None |
| Contact : |
All enquires to be made through the GETS Question & Answer function |
| Alternate Physical Delivery Address : | All submissions to be made through the GETS website |
| Alternate Physical Fax Number : | All submissions to be made through the GETS website |
| Agency Address : | NEW ZEALAND |
| Related Tenders: | |
Offsite Manufactured Buildings have been utilised by the Ministry since the 1950s, primarily for temporary and relocatable teaching spaces. In more recent times, Offsite Manufacturing (OSM) is becoming more prevalent within the construction industry globally.
OSM itself can range from the delivery of complete, weathertight, spaces to site (volumetric supply) to the provision of building components for on-site assembly such as wall panels and wiring looms. Newer technologies are also capable of 3D printing structures. This gives rise to the terms Design for Manufacture and Assembly (DfMA) and Modern Methods of Construction (MMC), giving emphasis to the utilisation of a range of techniques where part or all a structure are produced at facilities then transported to site for assembly.
The Ministry’s current Offsite Manufactured Building Program involves the delivery of prefabricated modular buildings of temporary and permanent nature. In the future, the OSM category will have greater alignment with the Ministry’s overall capital works program, including greater utilisation for the provision of permanent school spaces.
As the longer-term vision for the utilisation of offsite manufacturing exceeds the current expectation, it is critical to ensure that the Ministry has access to the right supply chain via a multi-stage market engagement. This will identify suppliers with appropriate capacity, capability and scalability that can positively impact the Education sector. Furthermore, it will re-establish baseline for quality, cost and value measures that can be used to benchmark against historical OMB trends as well as traditional construction approaches.
The current offering has been operating since 2015.
The services to be provided by the future panel are as follows:
• Designing, construction, installation and/or relocation of buildings
• Supply and lease of buildings
• Refurbishment and relocation of buildings
• Provision of prefabricated building components
As a minimum, suppliers should be able to provide a service to Design, Construct, Install and/or relocate buildings across one or multiple regions (North, Central, South). This is considered a ‘turnkey’ solution for the delivery of teaching spaces, as shown in the below diagram. The remaining services are preferred, though will not be considered mandatory service offerings.
This tender has been completed.
Further information:
the shortlisted suppliers have been taken through to a closed RFP
Date RFx was completed/updated:
Tuesday, 9 May 2023 12:58 PM (Pacific/Auckland UTC+12:00)
