Tender Closed
|
|
RFx ID : | 18654218 |
Tender Name : | CNC Lathe and CNC Milling Machine |
Reference # : | C17-009 |
Open Date : | Friday, 12 May 2017 1:00 PM (Pacific/Auckland UTC+12:00) |
Close Date : | Friday, 9 June 2017 1:00 PM (Pacific/Auckland UTC+12:00) |
Tender Type : | Request for Proposals (RFP) |
Tender Coverage : | Sole Agency [?] |
Categories : |
|
Regions: |
|
Exemption Reason : | None |
Required Pre-qualifications : | None |
Contact : |
Dameon Arendse d.arendse@auckland.ac.nz 09 923 9176 |
Alternate Physical Delivery Address : | |
Alternate Physical Fax Number : | |
Agency Address : | NEW ZEALAND |
The University of Auckland requires a CNC Lathe and CNC Milling Machine for the Auckland Bioengineering Institute to assist with research activities and rapid prototype testing.
The procured CNC Milling Machine must be a 5 axis simultaneous mill with a swivel rotary table. The machine must have a minimum 16 tool turret/station SK/BT 40 and minimum 10,000 RPM. Minimum X travel 500mm, minimum Z travel 400mm and minimum Y travel 450mm is required; as well as a manual control.
The procured CNC Lathe must have a minimum 6 inch chuck and controlled electronically using a Fanuc controller, and have a minimum of 12 live tool stations. X,Y,Z and C axis must be controllable. It must also provide the option of sub spindle.
Both machines must:
• have standard CNC accuracy and repeatability
• be able to manufacture small parts, mostly made from aluminium with some parts made from stainless steel and steel
• usage typical for engineered parts manufactured in a research and development facility
• must comply with Australian / New Zealand safety standards
Students and researchers successfully using the CNC Lathe and CNC Mill will become expert users who may develop a preference for using the selected brand / model and it may be an important career factor should they leave the University.
This tender has been awarded to: