|RFx ID :||21406077|
|Tender Name :||DHV Stage 2b Modifications Request for Tender|
|Reference # :||1-328-10|
|Open Date :||Monday, 12 August 2019 6:00 PM (Pacific/Auckland UTC+12:00)|
|Close Date :||Wednesday, 11 September 2019 5:00 PM (Pacific/Auckland UTC+12:00)|
|Tender Type :||Request for Tenders (RFT)|
|Tender Coverage :||Sole Agency [?]|
|Exemption Reason :||None|
|Required Pre-qualifications :||None|
|Alternate Physical Delivery Address :|
|Alternate Physical Fax Number :|
|Agency Address :||NEW ZEALAND|
This RFT is an invitation to Tenderers to submit a Tender to the Crown for the Dive and Hydrographic Vessel Stage 2b Modifications Project (the DHV 2b Mods Project) contract opportunity.
The MoD in conjunction with the NZDF has procured a Diving and Hydrographic vessel (HMNZS MANAWANUI) for the Royal New Zealand Navy. This Ship is a 15-year old Norwegian built ship that has been operating as an oil and gas industry support vessel in the North Sea. Following purchase of the Ship, modifications (termed Stage 1 modifications) were carried out in Europe, including the installation of diving, hydrographic and ROV systems. The Ship was delivered to Devonport Naval Base in Auckland, where it will remain alongside until the end of 2019. Modifications to install communication equipment (termed Stage 2a modifications) will be completed by an approved installer during this time. Mechanical and electrical modifications form a package (termed Stage 2b modifications) that will need to be carried out by the end of 2019 concurrently with Stage 2a modifications.
This RFT is seeking Tenders to complete the entire Stage 2b modifications package mentioned above. It is expected this package will be completed between October and December 2019 and must be carried out at the Devonport Naval Base. The current intent is that the Ship will not move from its location during 2019 and there is currently no requirement for it to be put in the dry-dock facility.
This RFT is made up of three parts, being:
(a) Part One: Instructions and Conditions of Tender.
(b) Part Two: Statement of Requirements.
(c) Part Three: The draft Contract
The Contractual Compliance Matrix required to be completed in accordance with paragraph 1 of Schedule 3 also forms part of this RFT, and is issued as part of the RFT package.
The timeline for the DHV 2b Mods Project RFT is as follows:
Industry briefing/Industry Day - 22 August 2019
Deadline for Tenderer questions to the Crown - 1700 Hrs 28 August 2019
RFT closes (the Tender Closing Time) - 1700 Hrs 11 September 2019
The contact details for the Contact Officer for this RFT are as follows:
No Winner The DHV Stage 2b Modifications Request for Tender was awarded to Babcock New Zealand Limited, Auckland, on 9 October 2019.