SUP-13073 Fabrication of Attachment Point Designs

Details

Tender Closed
RFx ID :	17847572
Tender Name :	SUP-13073 Fabrication of Attachment Point Designs
Reference # :	SUP-13073
Open Date :	Tuesday, 30 August 2016 4:30 PM (Pacific/Auckland UTC+12:00)
Close Date  :	Friday, 23 September 2016 2:00 PM (Pacific/Auckland UTC+12:00)
Tender Type :	Request for Quotations (RFQ)
Tender Coverage :	Sole Agency  [?]
Categories :	31330000 - Fabricated structural assemblies
Regions:	N/A
Exemption Reason :	None
Required Pre-qualifications :	None
Contact :	Heath Crawford procurement@transpower.co.nz
Alternate Physical Delivery Address  :
Alternate Physical Fax Number  :
Agency Address :

The purpose of this procurement is to source a supplier for the fabrication of attachment points to Transpower’s attachment point designs standard TP.DL 01.06 for the earth wire and insulator set attachment design and drawings.
There were few attachment points already designed as part of previous financial year attachment point work. We propose that the 8 steel angle sizes detailed below and the corresponding approximate weight, is what will be required to fabricate the vast majority of existing designs per annum. All new designs will attempt to utilise the below proposed steel angle sections only.

a. 100*100*12 (1 tonne)
b. 125*125*12 (0.5 tonnes)
c. 125*70*12 (15 tonnes)
d. 125*75*12 (20 tonnes)
e. 75*75*12 (100 kg)
f. 150*90*16 (6 tonnes)
g. 75*50*8 (100 kg)
h. 75*75*10 (50 kg)

Approximately one half of all sections will require machining longitudinally. Above mentioned tonnes are approximate weights of each section that are required during FIN16/17 and it will be an ongoing requirement going forward. The tonnage information will become more accurate as designs get finalised, however the total tonnage is not expected to change much, apart from the distribution between section sizes.

No Winner The contract has been awarded to Ashhurst Engineering & Construction Co (1989) Limited (AEC).