Supplier log in
South Canterbury Asphaltic Concrete - Structural mill and fill as required - PW
Details
| RFx ID : | 32823858 |
| Tender Name : | South Canterbury Asphaltic Concrete - Structural mill and fill as required - PW |
| Reference # : | 12368 |
| Open Date : | Thursday, 23 October 2025 8:30 AM (Pacific/Auckland UTC+13:00) |
| Close Date : | Thursday, 13 November 2025 4:00 PM (Pacific/Auckland UTC+13:00) |
| Department/Business Unit : | NZ Transport Agency - Highways and Network Operations |
| Tender Type : | Request for Tenders (RFT) |
| Tender Coverage : | Sole Agency [?] |
| Categories : |
|
| Regions: |
|
| Exemption Reason : | None |
| Required Pre-qualifications : | None |
| Contact : |
Scott McKenzie scott.mckenzie@nzta.govt.nz |
| Alternate Physical Delivery Address : | |
| Alternate Physical Fax Number : |
This is a Physical Works contract for This Contract is for the construction of asphalt resurfacing of SH1 at the following two locations.
The Contract Works comprise of:
Separable Portion A: 01S/430/1295 - 1990 (0.7 km). The scope of works is thin asphalt concrete treatment (traffic lanes and central flush median only) by milling and filling, with additional digout areas where structural pavement failure has been observed.
A provisional item has been allowed for milling and filling the southbound shoulder and cycle lane. A decision can subsequently be made on whether to progress with this option pending budget availability and engineering judgement.
Separable Portion B: 01S/430/2875 - 3310 (0.44 km). The scope of works is thin asphalt concrete treatment (full road width) by milling and filling, with additional digout areas where structural pavement failure has been observed.
Only tenderers pre-qualified to Surfacing – Level C (2C) and Construction – Level C (4C). under the terms of the Transport Agency’s Prequalification System are eligible to submit a tender.
Electronic copies of the RFT documentation are attached to this advertisement.
ALL TENDERER’S QUERIES are to be SUBMITTED through the GETS Questions and Answers.
All responses to tender queries/clarifications will be answered by Notice to Tenderer which will be available in the GETS addenda.
Tender submissions shall be uploaded to GETS eTender box in a SINGLE zip file.
The GETS file upload limit is 50 MB. The file should be labelled as:
• File 1 – 12368 South Canterbury Asphaltic Concrete (Structural Mill and fill, as required.)– proposal including price (Schedule of Prices in PDF and Excel format spreadsheet)
Tender submissions will only be accepted electronically via the GETS eTender box.
Tenderers should refer to the GETS website for instructions on uploading their tender submission files
https://www.gets.govt.nz/SupplierUserTenderHelp.htm
GETS Advert in full attached.
