Supplier log in
Custom-Built Dive Boat (Wellington)
Details
|
Tender Closed
|
|
| RFx ID : | 26112057 |
| Tender Name : | Custom-Built Dive Boat (Wellington) |
| Reference # : | |
| Open Date : | Friday, 29 July 2022 2:00 PM (Pacific/Auckland UTC+12:00) |
| Close Date : | Friday, 2 September 2022 12:00 PM (Pacific/Auckland UTC+12:00) |
| Tender Type : | Request for Proposals (RFP) |
| Tender Coverage : | Sole Agency [?] |
| Categories : |
|
| Regions: |
|
| Exemption Reason : | None |
| Required Pre-qualifications : | None |
| Contact : |
Desiree Campbell - Procurement Coordinator desiree.campbell@niwa.co.nz |
| Alternate Physical Delivery Address : | Procurement@niwa.co.nz |
| Alternate Physical Fax Number : | |
| Agency Address : | |
We are seeking proposals from suitably qualified and experienced boat builders to manufacture and supply an aluminium pontoon dive boat, approximately 6.2 – 6.5 metres in length, with a hard top cabin. The boat must have a high standard of safety, seaworthiness, and sea-kindliness. The boat design and manufacture must comply with all relevant statutory and industry requirements, including but not limited to Maritime Rules 40A and 40C for passenger and non-passenger boats working in Enclosed Waters and Inshore Limits. The new boat will be a valuable addition to our fleet of 26 power boats which are transported on trailers to a wide range of locations around the country to carry out environmental research.
No Winner
