477-16-282-FM Tamaki River Pile Mooring Replacement

Details

Tender Closed
RFx ID :	17421629
Tender Name :	477-16-282-FM Tamaki River Pile Mooring Replacement
Reference # :	477-16-282-FM
Open Date :	Monday, 18 April 2016 1:00 PM (Pacific/Auckland UTC+12:00)
Close Date  :	Tuesday, 10 May 2016 10:00 AM (Pacific/Auckland UTC+12:00)
Tender Type :	Request for Tenders (RFT)
Tender Coverage :	Sole Agency  [?]
Categories :	72000000 - Building and Facility Construction and Maintenance Services
Regions:	New Zealand
Exemption Reason :	None
Required Pre-qualifications :	None
Contact :	Dan Suciu procurement@at.govt.nz
Alternate Physical Delivery Address  :
Alternate Physical Fax Number  :
Agency Address :

The Auckland Transport (AT) Harbourmaster’s Office owns and administers some 190 pile mooring berths within the Panmure Mooring Management Area -Tamaki River. The Harbourmaster’s Office is looking to replace the existing hardwood pile moorings over the next six years with Steel I Beams covered with a polyethylene sleeve.
This Request for Tender (RFT) is issued by Auckland Transport (AT) for the Harbourmaster’s Office. The aim of this process is to award a Contract for the removal of disposal of existing mooring piles, supply, construction and installation of replacement steel I beams piles and associated materials in the Tamaki River.
The aim of the Harbourmaster’s Office in this RFT process is to obtain sufficiently detailed information from potential marine contractors. They should provide details about their respective organisation, and clearly illustrate their ability to install the pile berths within the Panmure mooring management area (having regard to several factors including the quality of the works, the supplier's ability to deliver on a timely basis, and a competitive price). This will enable Auckland Transport to select and appoint a suitably qualified and skilled marine contractor.

This RFT sets out to identify a Tenderer who will be able to best provide AT with:

• supply of 33 steel I Beams and flat bar;
• welding flat bar to I Beam creating a 6 metre lateral box section as per supplied drawing;
• supply of polyethylene sleeve, sand to fill the sleeve, plastic pile top caps and plastic pile numerals;
• temporary removal of occupying vessel;
• removal of 33 existing hardwood piles up to 15 metres in length;
• driving new I beams with a 6 metre lateral box section;
• installing polyethylene sleeve, sand filling the sleeve, installing pile top caps and installing pile numerals;
• placement of existing floating ring over new pile;
• re-berthing of vessel.

No Winner $100K - $250K