Tender Closed
|
|
RFx ID : | 26397288 |
Tender Name : | SH6/84 Mt Iron Wanaka Roundabout |
Reference # : | 7276 |
Open Date : | Thursday, 29 September 2022 3:00 PM (Pacific/Auckland UTC+13:00) |
Close Date : | Tuesday, 1 November 2022 4:00 PM (Pacific/Auckland UTC+13:00) |
Department/Business Unit : | NZ Transport Agency - Highways and Network Operations |
Tender Type : | Request for Tenders (RFT) |
Tender Coverage : | Sole Agency [?] |
Categories : |
|
Regions: |
|
Exemption Reason : | None |
Required Pre-qualifications : | None |
Contact : |
Richard Hilliard richard.hilliard@wsp.com |
Alternate Physical Delivery Address : | |
Alternate Physical Fax Number : | |
Agency Address : | NEW ZEALAND |
This is a Physical Works contract for the construction of a new 5 leg roundabout at the intersection of SH6/SH84 with Riverbank Road, including an entrance to a new development at the base of Mt iron.
The Contract Works comprise of:
• A new single-lane roundabout at the intersection of SH6/SH84 and Riverbank Road.
• Construction of a new shared path around the periphery of the roundabout.
• Construction of stormwater management systems including: swales, soak pits, mud tanks and culverts.
• Relocation and realignment of utility services as required.
• Pavement and surfacing, including pavement construction, chip seal, AC and structural asphalt pavement layers.
• Concrete works, including removing existing and constructing new: kerbs, footpaths, shared paths, and traffic islands.
• Earthworks.
• Street lighting.
• Signs and markings.
• Fencing, landscape planting, and reinstatement.
Only tenderers pre-qualified to ‘Construction – Level B (4B)’ under the terms of the Transport Agency’s Prequalification System are eligible to submit a tender.
Electronic copies of the Request for Tender (RFT) documentation are attached to this advertisement.
ALL TENDER QUERIES are to be submitted through the GETS Questions and Answers.
All responses to tender queries/clarifications will be answered by Notice to Tenderer which will be available in the GETS addenda.
Tender submissions shall be uploaded to GETS eTender box in two separate files.
The GETS file upload limit is 50MB. The files should be labelled:
- File No 1 – Contract 7276 - Proposal excluding Price
- File No 2 – Contract 7276 – Price (pdf format PLUS MS Excel editable spreadsheet for Schedule of Prices)
Tender submissions will only be accepted electronically via the GETS eTender Box.
Tenderers should refer to the GETS website for instructions on uploading their tender submission files https://www.gets.govt.nz/SupplierUserTenderHelp.htm
This tender has been awarded.