|RFx ID :||20547083|
|Tender Name :||Labour, Access and Remedial Works for Invasive Testing at Otahuhu College|
|Reference # :|
|Open Date :||Friday, 14 December 2018 9:00 AM (Pacific/Auckland UTC+13:00)|
|Close Date :||Friday, 1 February 2019 5:00 PM (Pacific/Auckland UTC+13:00)|
|Department/Business Unit :||Ministry of Education - Approval from Ministry Employee - ie. Case Manager|
|Tender Type :||Request for Tenders (RFT)|
|Tender Coverage :||Sole Agency [?]|
|Required Pre-qualifications :||None|
All queries to be made through the GETS questions and answers function
|Alternate Physical Delivery Address :||All submissions to be made through the GETS website|
|Alternate Physical Fax Number :|
The “Martin Block” at Otahuhu College was constructed Cira 1932 with various additions completed over the following years. The building’s façade is Heritage listed grade II and has an existing original classroom set up from the early 1930’s which has great importance and historical value to the community.
There have been serious weather-tight issues over the past decade or more which requires intensive investigation to come up with a scope of works to then prepare a full Business Case to acquire funding to carry out redevelopment works as required.
o The Contractor will be required to provide the labour and access to enable the testing and reporting of the target areas by the Engineer. Generally this will include destructive and passive testing, sampling materials, taking photographs, and reinstatement work to the areas affected by testing. All P&G,
H&S, access and site logistics will be provided by the Contractor. At all times the Contractor will work under the direction of the Engineer and adhere to the requirements of the school.
o Remove for inspection certain areas of the brick Façade as detailed in the Engineer’s specification. Facilitate the testing of the bricks for density and strength, take detailed photos of the cavity and then make good by installing new bricks to match existing.
o Open up for inspection certain areas of the internal structure of the building as detailed in the Engineer’s specification. Facilitate the testing of the internal steel structure for density, strength and condition and take photos, then make good the affected areas.
o Assist the inspection works to ceiling and roof structure as per Engineer’s specification.
o Assist the inspection works to floor cavity and surrounding area as per Engineer’s specifications.