Tender Closed
|
|
RFx ID : | 20321660 |
Tender Name : | Fords Reservoir - Physical Works |
Reference # : | |
Open Date : | Monday, 29 October 2018 9:30 PM (Pacific/Auckland UTC+13:00) |
Close Date : | Friday, 7 December 2018 12:00 PM (Pacific/Auckland UTC+13:00) |
Tender Type : | Request for Quotations (RFQ) |
Tender Coverage : | Sole Agency [?] |
Categories : |
|
Regions: |
|
Exemption Reason : | None |
Required Pre-qualifications : | None |
Contact : |
Hunter Stivens hunter@progressiongroup.co.nz 021317115 |
Alternate Physical Delivery Address : | JACOBS NEW ZEALAND, LEVEL 2, WYNN WILLIAMS BUILDING | 47 HEREFORD STREET | CHRISTCHURCH |
Alternate Physical Fax Number : | |
Agency Address : |
This request for quotation (RFQ) is issued by Kaikōura District Council.
a) The scope of the works is generally as follows:
The Contract Works include the supply of all labour, materials, plant including dewatering system equipment for the construction of the Ford Reservoir scheme. This includes, but is not necessarily limited to, the items listed below:
• The decommissioning, demolition, and disposal of two existing reservoir structures at the Ford Reservoir site: Fords 1 (Buried concrete tank reservoir) and Fords 2 (Excavated earth bund lined and with a floating HDPE cover).
• Infill earthworks of removed bladder tank reservoir (Fords 2). From intrusive geotechnical investigations it is expected that site won material from the excavation around the new Fords 1 reservoir tank will be suitable to infill the Fords 2 bladder reservoir. As land currently occupied by the Fords 2 reservoir is intended for use as a future residential development, fill material is required to be selected and compacted to achieve the bearing capacity requirements of ‘Good Ground’ as defined in NZS 3604.
• Earthworks to create level platform for new reservoir to replace existing Fords 1 Reservoir. A minimum 3 m wide level area surrounding the tanks will be provided for maintenance access, bounded by a cut slope to the existing adjacent ground. The existing cut slope around the Fords 3 reservoir stands at approximately 1H:5V and has showed no signs of instability as a result of the 2016 Kaikōura earthquake. As such, the design of the cut slopes surrounding the new Fords 1 reservoir utilise a 1H:4V grade.
• A Nominated Supplier; Tasman Tanks; is responsible for the design, supply, and installation of a new 1500 m3 capacity reservoir tank to replicate the existing Fords 3 Reservoir at the same level and location. The Contractor is responsible for:
- All electrical works, including design, connections, equipment, and earthing;
- Internal and external piping to and from the tank;
- Construction of tank concrete foundation (design by Nominated Tank Supplier).
• The supply, construction, testing, and commissioning of new PVC water supply pipework to connect the new reservoir to existing water supply pressure and gravity pipework and booster pump station on the site.
• Planting and landscaping surrounding top of cut slope.
This tender has been awarded. Total spend value $ 898,946.